Evergreen Weigh's jack point aircraft and helicopter scales are designed around precision strain gage load cells which fit on top of aircraft jacks.   The entire system is color-coded for easy setup and use, and comes in a convenient high strength plastic roll around storage case.  The indicator has a liquid crystal display with built in back light for day and night use.  It will display the weight of each individual load cell or the total of any combination.  The indicator is microprocessor controlled with full digital calibration and comes in a rugged portable "suitcase" type enclosure.  The load cells are available in capacities of 5.000, 15.000, 50.000 and 100.000 pounds per cell and have an accuracy of 0.1%.  All systems can be set to read either pounds or kilograms.

Kit Features

• Digital indicator
• Model number: "Full Function" 3-0101
• Display is liquid crystal (LCD) with 1 to 6 channels and can be programmed with pound or kilogram readout
• 12 VDC internal rechargeable battery with a 30 hour operation life; 120 VAC wall mount plug
• .7 amp circuit breaker
• Enclosure is manufactured from aluminum
• Communications is via RS-232 serial output
• 1 to 6 input channels
• Analog input sensitivity is .35µvolts/graduation
• Excitation voltage is 5 VDC
• Ten point digital calibration is completed on each kit
• Operating temperature range of -10°F to +120°F
• Storage temperature range of -30°F to +120°F

The Air Guardian low profile aircraft weigher is designed for fast, accurate weight and balance calculation on fixed and rotary wing aircraft.  Air Guardian is a one piece, fully self-contained aircraft weighing platform that features a slim. low height design to allow easy access on and off the weigher.  The weigher is fully electronic and powered by six AA size rechargeable batteries located in the weight display housing.  The internal batteries can be recharged from any 12 VDC or 120 VAC power source.  Weight data is displayed on an easy to read alphanumeric liquid crystal display (LCD).

Specifications

• Capacity: 0-30,000 lb
• Graduation: 1, 10, 20 lb (selectable)
• Accuracy: 0.1% of applied load or ±3 lb, whichever is greater
• Active weighing area: 22" x 15"
• Weight: 47 lb
• Temperature range: 0°F to 125°F (-20°C to 50°C)
• Safe overload: 150%
• Top and base materials: Aluminum alloy
• Display: 0.5" high, 16 character alphanumeric liquid crystal display (LCD)
• Power supply: 6 AA size alkline or rechargeable batteries, 8 hour operation
• Recharging unit: 12 VDC or 120 VAC wall mount charger (1 per weigher)

The Road Runner I wheel load weighers provide fast accurate weight readings for a variety of light and medium applications.  Road Runner I has been designed to be highly portable and easily transported to weigh sites.  Road Runner I can be set up in a matter of minutes.  Using the "Full Function" or "Super Simple" digital indicator the operator can display the weight on each pad individually, or the total of any combination of pads.  Options for the system include external 12 VDC input, 220 VAC battery charger, interlocking ramps with a 10 degree slope, tire stops (wheel chocks), and and external printer.

Specifications

• Digital indicator model number: "Full Function 3-0101
• Display: Liquid crystal display (LCD), lb or kg display, 1-6 channels
• Power: 12 VDC internal rechargeable battery with 30 hour operation life, 120 VAC wall mount plug
• Protection: .7 amp circuit breaker
• Enclosure size: 9" high x 7" long x 11" wide
• Weight: 8 lb
• Material: Aluminum
• Communications: RS-232 serial output